Home » How To Hack WiFi On Android Phone

How To Hack WiFi On Android Phone

how to hack wifi

Most of us trying to get someone WiFi password and sometimes trying to get neighbours WiFi password to surf internet free of cost. So, how to hack WiFi? Well, getting a password and hacking a password both are different things. I also search and try this a lot using different Android apps and then I tried it with Kali Linux. One of the best tools is Kali Linux. I tried on WEP but now a time almost all WiFi is WPA2 secured.

See Also

Hack WiFi With Android

There are many apps on play store which claims that they can hack WiFi password. It is difficult to hack WPA2 secure WiFi password. There are some techniques you can use to hack WiFi password using android. Hack Wifi with Android using third-party apps. However, this app can not guarantee you that it can actually hack WPA2 secured WiFi. Some apps might work well but only on WEP WiFi.

How To Hack WiFi?

This app works for WEP/WPA.

Step 1

Root your android device. Yes, you must need a rooted android device to hack WiFi using Android. All this type of apps required your device to be rooted. This

Step 2

Download and install bcmon. This tool enables Monitor Mode on your Broadcom chipset, which is essential for being able to crack the PIN. The bcmon APK file is available for free from the bcmon page on the Google Code website. To install an APK file, you will need to allow installation from unknown sources in your Security menu.

Step 3

Run bcmon. After installing the APK file, run the app. If prompted, install the firmware and tools. Tap the “Enable Monitor Mode” option. If the app crashes, open it and try again. If it fails for the third time, your device is most likely not supported.

Step 4

Tap “Run bcmon terminal”. This will launch a terminal similar to most Linux terminals.Type airodump-ng and tap the Enter button. AIrdump will load, and you will be taken to the command prompt again. Type airodump-ng wlan0 and tap the Enter button.

Step 4

Identify the access point you want to crack. You will see a list of available access points. You must select an access point that is using WEP encryption.

Step 5

Note the MAC address that appears. This is the MAC address of the router. Make sure that you have the right one if there are multiple routers listed. Jot this MAC address down.

Also, note the Channel that the access point is broadcasting on.

Step 6

Start scanning the channel. You will need to collect information from the access point for several hours before you can attempt to crack the password. Typeairodump-ng -c channel# --bssid MAC address -w output ath0and tap Enter. Airodump will begin scanning. You can leave the device for a while as it scans for information. Be sure to plug it in if you are running low on battery.

  • Replace channel# with the channel number the access point is broadcasting on (e.g. 6).
  • Replace MAC address with the MAC address of the router (e.g 00:0a:95:9d:68:16)
  • Keep scanning until you reach at least 20,000-30,000 packets.

step 7

Crack the password. Once you have a suitable number of packets, you can start attempting to crack the password. Return to the terminal and type aircrack-ng output*.cap and tap Enter.

Now you will receive a password this hacking procedure can take 1-7 hours depending on security and network. After that, you have successfully hack wifi with android. So, this is how to hack WiFi. but as I told you nowadays almost all WiFi is WPA2 secured which you can not hack using such apps.

Source: http://www.androdumpper.net/

 

For any help, you can Contact Us or leave a message on the Facebook page.

Azzu

My name is Azad Ansari. I am from Delhi. I have completed my bachelor degree in computer science engineering. I have interest in technology and blogging that's why I have started this blog.

11 comments

Leave a Reply

Your Header Sidebar area is currently empty. Hurry up and add some widgets.